Skip to product information

Shell Helix HX7 10W-40 Synthetic Technology Premium Engine Oil 5L

Shell Helix HX7 synthetic technology motor oil – helps to keep engines clean and running efficiently.

Shell Helix HX8 helps to keep engines clean and running efficiently by helping to prevent the formation of sludge and engine deposits. It is suitable for a wide variety of modern vehicles driven in demanding traffic conditions. 

Shell Helix HX7 helps to prolong the engine life of modern vehicles in demanding daily traffic conditions by protecting against wear. Shell Helix HX7 can be used for petrol (gasoline) engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and petrol / ethanol blends.

General Details:

Capacity [litre] 5,0
ACEA specification A3/B3
ACEA specification A3/B4
Manufacturer Approval MB 229.3
Manufacturer Approval Renault RN 0700
Manufacturer Approval Renault RN 0710
Manufacturer Approval VW 501 01
Manufacturer Approval VW 505 00
SAE viscosity class 10W-40
Observe service information

Benefits:

  • Synthetic Technology: Uses Both Synthetic And Mineral Base Stocks To Achieve Higher Performance Levels Than Can Be Formulated From Mineral Oils Alone.
  • Shell's Unique Active Cleansing Technology: Actively Locks Away Harmful Performance-Robbing Deposits.
  • Active Clean-Up: Helps To Remove Sludge Left Behind By Inferior Oils (Based On A Sever Sludge Clean-Up Test).
  • Excellent Wear Protection 1: Helps To Extend Engine Life By Protection Against Wear, Even In Daily Traffic Conditions.
  • Excellent Resistance To Degradation: Helps To Maintain Protection Throughout The Oil-Drain Interval.
  • Low-Temperature Performance: Faster Oil Flow For Quicker Engine Warm-Up, Compared With Shell Helix Mineral Oils.
  • Low-Evaporation Formulation 2: Low Oil Consumption For Less Frequent Top-Up.
  • Multi-Fuel Capability: Can Be Used For Petrol, Diesel And Gas Engines, And Is Also Suitable For Biodiesel And Petrol/Ethanol Blends.
1 Based on Sequence IVA engine test carried out and independent laboratory
2 Based on NOACK volatility test and equipment manufacturers' requirements

Specifications:

  • API SN
  • API SM
  • API CF
  • ACEA A3/B3
  • ACEA A3/B4
  • JASO SG+
  • Mercedes Benz Approval MB 229.3
  • VW 502.00 / VW 505.00
  • Fiat: meets the requirements of Fiat 9.55535 G2
  • Renault RN 0700 / RN0710

Brand

Shell

Recently Viewed..

See All Product